c 多线程的简单程序 运行后的结果不明白
本帖最后由 fengfeiwanqian 于 2013-10-11 21:32:39 编辑 #include<stdio.h>
#include<pthread.h>
#include<time.h>
pthread_mutex_t lock;
pthread_cond_t c;
int count=0;
int i=1;
void put()
{
pthread_mutex_lock(&lock);
while(count==0){
printf("put %d\n",i);
i++;
pthread_cond_wait(&c,&lock);
}
count--;
printf("put2 %d\n",i);
i++;
pthread_cond_signal(&c);
pthread_mutex_unlock(&lock);
}
void get()
{
pthread_mutex_lock(&lock);
while(count!=0)
{
printf("get %d\n",i);
i++;
pthread_cond_wait(&c,&lock);
}
count++;
printf("get2 %d\n",i);
i++;
pthread_cond_signal(&c);
pthread_mutex_unlock(&lock);
}
int main()
{
pthread_t t1,t2;
pthread_mutex_init(&lock,NULL);
pthread_cond_init(&c,NULL);
pthread_create(&t1,NULL,put,0);
pthread_create(&t2,NULL,get,0);
printf("test\n");
return 0;
}
上述程序运行结果：
put 1
put 1
test
get2 2
这个是其中出来的一个结果，不明白为什么出来了两个put 1，请大牛们给说说，谢谢！ 多线程 c
[解决办法]
线程的不安全机制 用多线程 最好不用全局变量 用的时候需要小心加锁
（1）pthread_mutex_lock()函数锁住由mutex指定的mutex 对象。如果mutex已经被锁住，调用这个函数的线程阻塞直到mutex可用为止。
（2）pthread_cond_wait时，如果条件不成立我们就进入阻塞，但是进入阻塞这个期间，如果条件变量改变了的话，那我们就漏掉了这个条件。因为这个线程还没有放到等待队列上，所以调用pthread_cond_wait前要先锁互斥量，即调用pthread_mutex_lock(),pthread_cond_wait在把线程放进阻塞队列后，自动对mutex进行解锁，使得其它线程可以获得加锁的权利。这样其它线程才能对临界资源进行访问并在适当的时候唤醒这个阻塞的进程。当pthread_cond_wait返回的时候又自动给mutex加锁。
执行时
void put()
{
pthread_mutex_lock(&lock);
while(count==0) //第一次执行 因为 count == 0
{
printf("put %d\n",i); // 输出put 1
// 第二个线程启动 pthread_mutex_lock(&lock); （1）如果mutex已经被锁住，调用这个函数的线程阻塞直到mutex可用为止。
//阻塞后应该在返回的时候直接跳到这了pthread_cond_wait(&c,&lock);
略过了i++ 之后执行 这个函数进行解锁 同理不执行put2 跳过
pthread_mutex_lock(&lock);
while(count!=0)
{
printf("get %d\n",i);
i++;
pthread_cond_wait(&c,&lock);
}
count++;
printf("get2 %d\n",i);
i++;
pthread_cond_signal(&c);
pthread_mutex_unlock(&lock);
}
pthread_mutex_lock(&lock);
while(count==0){
printf("put %d\n",i);
i++;
pthread_cond_wait(&c,&lock);
}
count--;
printf("put2 %d\n",i);
i++;
pthread_cond_signal(&c);
pthread_mutex_unlock(&lock);
}
i++;
pthread_cond_wait(&c,&lock);
}
count--;
printf("put2 %d\n",i); i++;
pthread_cond_signal(&c);
pthread_mutex_unlock(&lock);
}
[解决办法]
首先把你的两个线程函数改成这都编译过了，用的什么编译器
void* put(void *param);
void* get(void *param);
pthread_cond_signal函数的作用是发送一个信号给另外一个正在处于阻塞等待状态的线程,使其脱离阻塞状态,继续执行.
如果没有线程处在阻塞等待状态,pthread_cond_signal也会成功返回。
使用pthread_cond_signal一般不会有“惊群现象”产生，他最多只给一个线程发信号。
假如有多个线程正在阻塞等待着这个条件变量的话，那么是根据各等待线程优先级的高低确定哪个线程接收到信号开始继续执行。
如果各线程优先级相同，则根据等待时间的长短来确定哪个线程获得信号。但无论如何一个pthread_cond_signal调用最多发信一次。
所以结果可能因为环境不一样会有不一样的效果，即使环境一样也可能得到不一样的结果！
具体参考下
http://blog.csdn.net/hudashi/article/details/7709421
[解决办法]
嗯，函数签名不对都让你编译过去，厉害...
[解决办法]
仅供参考
//循环向a函数每次发送200个字节长度（这个是固定的）的buffer,
//a函数中需要将循环传进来的buffer，组成240字节（也是固定的）的新buffer进行处理，
//在处理的时候每次从新buffer中取两个字节打印
#ifdef WIN32
#pragma warning(disable:4996)
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#ifdef WIN32
#include <windows.h>
#include <process.h>
#include <io.h>
#define MYVOID void
#define vsnprintf _vsnprintf
#else
#include <unistd.h>
#include <sys/time.h>
#include <pthread.h>
#define CRITICAL_SECTION pthread_mutex_t
#define MYVOID void *
#endif
//Log{
#define MAXLOGSIZE 20000000
#define MAXLINSIZE 16000
#include <time.h>
#include <sys/timeb.h>
#include <stdarg.h>
char logfilename1[]="MyLog1.log";
char logfilename2[]="MyLog2.log";
static char logstr[MAXLINSIZE+1];
char datestr[16];
char timestr[16];
char mss[4];
CRITICAL_SECTION cs_log;
FILE *flog;
#ifdef WIN32
void Lock(CRITICAL_SECTION *l) {
EnterCriticalSection(l);
}
void Unlock(CRITICAL_SECTION *l) {
LeaveCriticalSection(l);
}
void sleep_ms(int ms) {
Sleep(ms);
}
#else
void Lock(CRITICAL_SECTION *l) {
pthread_mutex_lock(l);
}
void Unlock(CRITICAL_SECTION *l) {
pthread_mutex_unlock(l);
}
void sleep_ms(int ms) {
usleep(ms*1000);
}
#endif
void LogV(const char *pszFmt,va_list argp) {
struct tm *now;
struct timeb tb;
if (NULL==pszFmt
[解决办法]
0==pszFmt[0]) return;
vsnprintf(logstr,MAXLINSIZE,pszFmt,argp);
ftime(&tb);
now=localtime(&tb.time);
sprintf(datestr,"%04d-%02d-%02d",now->tm_year+1900,now->tm_mon+1,now->tm_mday);
sprintf(timestr,"%02d:%02d:%02d",now->tm_hour ,now->tm_min ,now->tm_sec );
sprintf(mss,"%03d",tb.millitm);
printf("%s %s.%s %s",datestr,timestr,mss,logstr);
flog=fopen(logfilename1,"a");
if (NULL!=flog) {
fprintf(flog,"%s %s.%s %s",datestr,timestr,mss,logstr);
if (ftell(flog)>MAXLOGSIZE) {
fclose(flog);
if (rename(logfilename1,logfilename2)) {
remove(logfilename2);
rename(logfilename1,logfilename2);
}
} else {
fclose(flog);
}
}
}
void Log(const char *pszFmt,...) {
va_list argp;
Lock(&cs_log);
va_start(argp,pszFmt);
LogV(pszFmt,argp);
va_end(argp);
Unlock(&cs_log);
}
//Log}
#define ASIZE 200
#define BSIZE 240
#define CSIZE 2
char Abuf[ASIZE];
char Cbuf[CSIZE];
CRITICAL_SECTION cs_HEX ;
CRITICAL_SECTION cs_BBB ;
struct FIFO_BUFFER {
int head;
int tail;
int size;
char data[BSIZE];
} BBB;
int No_Loop=0;
void HexDump(int cn,char *buf,int len) {
int i,j,k;
char binstr[80];
Lock(&cs_HEX);
for (i=0;i<len;i++) {
if (0==(i%16)) {
sprintf(binstr,"%03d %04x -",cn,i);
sprintf(binstr,"%s %02x",binstr,(unsigned char)buf[i]);
} else if (15==(i%16)) {
sprintf(binstr,"%s %02x",binstr,(unsigned char)buf[i]);
sprintf(binstr,"%s ",binstr);
for (j=i-15;j<=i;j++) {
sprintf(binstr,"%s%c",binstr,('!'<buf[j]&&buf[j]<='~')?buf[j]:'.');
}
Log("%s\n",binstr);
} else {
sprintf(binstr,"%s %02x",binstr,(unsigned char)buf[i]);
}
}
if (0!=(i%16)) {
k=16-(i%16);
for (j=0;j<k;j++) {
sprintf(binstr,"%s ",binstr);
}
sprintf(binstr,"%s ",binstr);
k=16-k;
for (j=i-k;j<i;j++) {
sprintf(binstr,"%s%c",binstr,('!'<buf[j]&&buf[j]<='~')?buf[j]:'.');
}
Log("%s\n",binstr);
}
Unlock(&cs_HEX);
}
int GetFromRBuf(int cn,CRITICAL_SECTION *cs,FIFO_BUFFER *fbuf,char *buf,int len) {
int lent,len1,len2;
lent=0;
Lock(cs);
if (fbuf->size>=len) {
lent=len;
if (fbuf->head+lent>BSIZE) {
len1=BSIZE-fbuf->head;
memcpy(buf ,fbuf->data+fbuf->head,len1);
len2=lent-len1;
memcpy(buf+len1,fbuf->data ,len2);
fbuf->head=len2;
} else {
memcpy(buf ,fbuf->data+fbuf->head,lent);
fbuf->head+=lent;
}
fbuf->size-=lent;
}
Unlock(cs);
return lent;
}
MYVOID thdB(void *pcn) {
char *recv_buf;
int recv_nbytes;
int cn;
int wc;
int pb;
cn=(int)pcn;
Log("%03d thdB thread begin...\n",cn);
while (1) {
sleep_ms(10);
recv_buf=(char *)Cbuf;
recv_nbytes=CSIZE;
wc=0;
while (1) {
pb=GetFromRBuf(cn,&cs_BBB,&BBB,recv_buf,recv_nbytes);
if (pb) {
Log("%03d recv %d bytes\n",cn,pb);
HexDump(cn,recv_buf,pb);
sleep_ms(1);
} else {
sleep_ms(1000);
}
if (No_Loop) break;//
wc++;
if (wc>3600) Log("%03d %d==wc>3600!\n",cn,wc);
}
if (No_Loop) break;//
}
#ifndef WIN32
pthread_exit(NULL);
#endif
}
int PutToRBuf(int cn,CRITICAL_SECTION *cs,FIFO_BUFFER *fbuf,char *buf,int len) {
int lent,len1,len2;
Lock(cs);
lent=len;
if (fbuf->size+lent>BSIZE) {
lent=BSIZE-fbuf->size;
}
if (fbuf->tail+lent>BSIZE) {
len1=BSIZE-fbuf->tail;
memcpy(fbuf->data+fbuf->tail,buf ,len1);
len2=lent-len1;
memcpy(fbuf->data ,buf+len1,len2);
fbuf->tail=len2;
} else {
memcpy(fbuf->data+fbuf->tail,buf ,lent);
fbuf->tail+=lent;
}
fbuf->size+=lent;
Unlock(cs);
return lent;
}
MYVOID thdA(void *pcn) {
char *send_buf;
int send_nbytes;
int cn;
int wc;
int a;
int pa;
cn=(int)pcn;
Log("%03d thdA thread begin...\n",cn);
a=0;
while (1) {
sleep_ms(100);
memset(Abuf,a,ASIZE);
a=(a+1)%256;
if (16==a) {No_Loop=1;break;}//去掉这句可以让程序一直循环直到按Ctrl+C或Ctrl+Break或当前目录下存在文件No_Loop
send_buf=(char *)Abuf;
send_nbytes=ASIZE;
Log("%03d sending %d bytes\n",cn,send_nbytes);
HexDump(cn,send_buf,send_nbytes);
wc=0;
while (1) {
pa=PutToRBuf(cn,&cs_BBB,&BBB,send_buf,send_nbytes);
Log("%03d sent %d bytes\n",cn,pa);
HexDump(cn,send_buf,pa);
send_buf+=pa;
send_nbytes-=pa;
if (send_nbytes<=0) break;//
sleep_ms(1000);
if (No_Loop) break;//
wc++;
if (wc>3600) Log("%03d %d==wc>3600!\n",cn,wc);
}
if (No_Loop) break;//
}
#ifndef WIN32
pthread_exit(NULL);
#endif
}
int main() {
#ifdef WIN32
InitializeCriticalSection(&cs_log);
InitializeCriticalSection(&cs_HEX );
InitializeCriticalSection(&cs_BBB );
#else
pthread_t threads[2];
int threadsN;
int rc;
pthread_mutex_init(&cs_log,NULL);
pthread_mutex_init(&cs_HEX,NULL);
pthread_mutex_init(&cs_BBB,NULL);
#endif
Log("Start===========================================================\n");
BBB.head=0;
BBB.tail=0;
BBB.size=0;
#ifdef WIN32
_beginthread((void(__cdecl *)(void *))thdA,0,(void *)1);
_beginthread((void(__cdecl *)(void *))thdB,0,(void *)2);
#else
threadsN=0;
rc=pthread_create(&(threads[threadsN++]),NULL,thdA,(void *)1);if (rc) Log("%d=pthread_create %d error!\n",rc,threadsN-1);
rc=pthread_create(&(threads[threadsN++]),NULL,thdB,(void *)2);if (rc) Log("%d=pthread_create %d error!\n",rc,threadsN-1);
#endif
if (!access("No_Loop",0)) {
remove("No_Loop");
if (!access("No_Loop",0)) {
No_Loop=1;
}
}
while (1) {
sleep_ms(1000);
if (No_Loop) break;//
if (!access("No_Loop",0)) {
No_Loop=1;
}
}
sleep_ms(3000);
Log("End=============================================================\n");
#ifdef WIN32
DeleteCriticalSection(&cs_BBB );
DeleteCriticalSection(&cs_HEX );
DeleteCriticalSection(&cs_log);
#else
pthread_mutex_destroy(&cs_BBB);
pthread_mutex_destroy(&cs_HEX);
pthread_mutex_destroy(&cs_log);
#endif
return 0;
}
