ActiveMQ 安装windwos服务不能启动问题
一.AcitveMQ windwos 服务
1.安装目录下新建 temp文件夹
2.安装目录下\bin\win32\wrapper.conf指定java.io.tempdir目录
wrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp"
# ------------------------------------# Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at# # http://www.apache.org/licenses/LICENSE-2.0# # Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License.# ------------------------------------#********************************************************************# Wrapper Properties#********************************************************************#wrapper.debug=TRUEset.default.ACTIVEMQ_HOME=../..set.default.ACTIVEMQ_BASE=../..wrapper.working.dir=.# Java Applicationwrapper.java.command=java# Java Main class. This class must implement the WrapperListener interface# or guarantee that the WrapperManager class is initialized. Helper# classes are provided to do this for you. See the Integration section# of the documentation for details.wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp# Java Classpath (include wrapper.jar) Add class path elements as# needed starting from 1wrapper.java.classpath.1=%ACTIVEMQ_HOME%/bin/wrapper.jarwrapper.java.classpath.2=%ACTIVEMQ_HOME%/bin/run.jar# Java Library Path (location of Wrapper.DLL or libwrapper.so)wrapper.java.library.path.1=%ACTIVEMQ_HOME%/bin/win32# Java Additional Parameters# note that n is the parameter number starting from 1.wrapper.java.additional.1=-Dactivemq.home="%ACTIVEMQ_HOME%"wrapper.java.additional.2=-Dactivemq.base="%ACTIVEMQ_BASE%"wrapper.java.additional.3=-Djavax.net.ssl.keyStorePassword=passwordwrapper.java.additional.4=-Djavax.net.ssl.trustStorePassword=passwordwrapper.java.additional.5=-Djavax.net.ssl.keyStore="%ACTIVEMQ_BASE%/conf/broker.ks"wrapper.java.additional.6=-Djavax.net.ssl.trustStore="%ACTIVEMQ_BASE%/conf/broker.ts"wrapper.java.additional.7=-Dcom.sun.management.jmxremotewrapper.java.additional.8=-Dorg.apache.activemq.UseDedicatedTaskRunner=truewrapper.java.additional.9=-Djava.util.logging.config.file=logging.propertieswrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp"# Uncomment to enable remote jmx#wrapper.java.additional.n=-Dcom.sun.management.jmxremote.port=1616 #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.authenticate=false #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.ssl=false# Uncomment to enable YourKit profiling#wrapper.java.additional.n=-Xrunyjpagent# Uncomment to enable remote debugging#wrapper.java.additional.n=-Xdebug -Xnoagent -Djava.compiler=NONE #wrapper.java.additional.n=-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005# Initial Java Heap Size (in MB)#wrapper.java.initmemory=3# Maximum Java Heap Size (in MB)wrapper.java.maxmemory=512# Application parameters. Add parameters as needed starting from 1wrapper.app.parameter.1=org.apache.activemq.console.Mainwrapper.app.parameter.2=start#********************************************************************# Wrapper Logging Properties#********************************************************************# Format of output for the console. (See docs for formats)wrapper.console.format=PM# Log Level for console output. (See docs for log levels)wrapper.console.loglevel=INFO# Log file to use for wrapper output logging.wrapper.logfile=%ACTIVEMQ_BASE%/data/wrapper.log# Format of output for the log file. (See docs for formats)wrapper.logfile.format=LPTM# Log Level for log file output. (See docs for log levels)wrapper.logfile.loglevel=INFO# Maximum size that the log file will be allowed to grow to before# the log is rolled. Size is specified in bytes. The default value# of 0, disables log rolling. May abbreviate with the 'k' (kb) or# 'm' (mb) suffix. For example: 10m = 10 megabytes.wrapper.logfile.maxsize=0# Maximum number of rolled log files which will be allowed before old# files are deleted. The default value of 0 implies no limit.wrapper.logfile.maxfiles=0# Log Level for sys/event log output. (See docs for log levels)wrapper.syslog.loglevel=NONE#********************************************************************# Wrapper Windows Properties#********************************************************************# Title to use when running as a consolewrapper.console.title=ActiveMQ#********************************************************************# Wrapper Windows NT/2000/XP Service Properties#********************************************************************# WARNING - Do not modify any of these properties when an application# using this configuration file has been installed as a service.# Please uninstall the service before modifying this section. The# service can then be reinstalled.# Name of the servicewrapper.ntservice.name=ActiveMQ# Display name of the servicewrapper.ntservice.displayname=ActiveMQ# Description of the servicewrapper.ntservice.description=ActiveMQ Broker# Service dependencies. Add dependencies as needed starting from 1wrapper.ntservice.dependency.1=# Mode in which the service is installed. AUTO_START or DEMAND_STARTwrapper.ntservice.starttype=AUTO_START# Allow the service to interact with the desktop.wrapper.ntservice.interactive=false
wrapper.java.command=C:/Program Files/Java/jdk1.7.0_25/bin/java
# ------------------------------------# Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at# # http://www.apache.org/licenses/LICENSE-2.0# # Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License.# ------------------------------------#********************************************************************# Wrapper Properties#********************************************************************# wrapper.debug=TRUEset.default.ACTIVEMQ_HOME=../..set.default.ACTIVEMQ_BASE=../..wrapper.working.dir=.# Java Applicationwrapper.java.command=C:/Program Files/Java/jdk1.7.0_25/bin/java# Java Main class. This class must implement the WrapperListener interface# or guarantee that the WrapperManager class is initialized. Helper# classes are provided to do this for you. See the Integration section# of the documentation for details.wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp# Java Classpath (include wrapper.jar) Add class path elements as# needed starting from 1wrapper.java.classpath.1=%ACTIVEMQ_HOME%/bin/wrapper.jarwrapper.java.classpath.2=%ACTIVEMQ_HOME%/bin/run.jar# Java Library Path (location of Wrapper.DLL or libwrapper.so)wrapper.java.library.path.1=%ACTIVEMQ_HOME%/bin/win32# Java Additional Parameters# note that n is the parameter number starting from 1.wrapper.java.additional.1=-Dactivemq.home="%ACTIVEMQ_HOME%"wrapper.java.additional.2=-Dactivemq.base="%ACTIVEMQ_BASE%"wrapper.java.additional.3=-Djavax.net.ssl.keyStorePassword=passwordwrapper.java.additional.4=-Djavax.net.ssl.trustStorePassword=passwordwrapper.java.additional.5=-Djavax.net.ssl.keyStore="%ACTIVEMQ_BASE%/conf/broker.ks"wrapper.java.additional.6=-Djavax.net.ssl.trustStore="%ACTIVEMQ_BASE%/conf/broker.ts"wrapper.java.additional.7=-Dcom.sun.management.jmxremotewrapper.java.additional.8=-Dorg.apache.activemq.UseDedicatedTaskRunner=truewrapper.java.additional.9=-Djava.util.logging.config.file=logging.propertieswrapper.java.additional.10=-Djava.io.tmpdir="%ACTIVEMQ_HOME%/temp"# Uncomment to enable remote jmx#wrapper.java.additional.n=-Dcom.sun.management.jmxremote.port=1616 #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.authenticate=false #wrapper.java.additional.n=-Dcom.sun.management.jmxremote.ssl=false# Uncomment to enable YourKit profiling#wrapper.java.additional.n=-Xrunyjpagent# Uncomment to enable remote debugging#wrapper.java.additional.n=-Xdebug -Xnoagent -Djava.compiler=NONE #wrapper.java.additional.n=-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005# Initial Java Heap Size (in MB)#wrapper.java.initmemory=3# Maximum Java Heap Size (in MB)wrapper.java.maxmemory=512# Application parameters. Add parameters as needed starting from 1wrapper.app.parameter.1=org.apache.activemq.console.Mainwrapper.app.parameter.2=start#********************************************************************# Wrapper Logging Properties#********************************************************************# Format of output for the console. (See docs for formats)wrapper.console.format=PM# Log Level for console output. (See docs for log levels)wrapper.console.loglevel=INFO# Log file to use for wrapper output logging.wrapper.logfile=%ACTIVEMQ_BASE%/data/wrapper.log# Format of output for the log file. (See docs for formats)wrapper.logfile.format=LPTM# Log Level for log file output. (See docs for log levels)wrapper.logfile.loglevel=INFO# Maximum size that the log file will be allowed to grow to before# the log is rolled. Size is specified in bytes. The default value# of 0, disables log rolling. May abbreviate with the 'k' (kb) or# 'm' (mb) suffix. For example: 10m = 10 megabytes.wrapper.logfile.maxsize=0# Maximum number of rolled log files which will be allowed before old# files are deleted. The default value of 0 implies no limit.wrapper.logfile.maxfiles=0# Log Level for sys/event log output. (See docs for log levels)wrapper.syslog.loglevel=NONE#********************************************************************# Wrapper Windows Properties#********************************************************************# Title to use when running as a consolewrapper.console.title=ActiveMQ#********************************************************************# Wrapper Windows NT/2000/XP Service Properties#********************************************************************# WARNING - Do not modify any of these properties when an application# using this configuration file has been installed as a service.# Please uninstall the service before modifying this section. The# service can then be reinstalled.# Name of the servicewrapper.ntservice.name=ActiveMQ# Display name of the servicewrapper.ntservice.displayname=ActiveMQ# Description of the servicewrapper.ntservice.description=ActiveMQ Broker# Service dependencies. Add dependencies as needed starting from 1wrapper.ntservice.dependency.1=# Mode in which the service is installed. AUTO_START or DEMAND_STARTwrapper.ntservice.starttype=AUTO_START# Allow the service to interact with the desktop.wrapper.ntservice.interactive=false
<bean id="securityConstraint" value="BASIC" /> <property name="roles" value="admin" /> <property name="authenticate" value="false" /> </bean>改为
<property name="authenticate" value="true" />
