ubuntu下minicom,fastboot安装
?一、minicom的安装
????? 1.用sudo apt-get install minicom安装
? ?? 2.设置
?????? 用sudo minicom -s进入设置界面，选择Serial port setup选项：
????? serial device :/dev/ttyUSB0?
?????? Bps/Par/Bits:115200 8N1
?????? Hardware Flow Control: NO
??????Software Flow Control: NO
????? 之后退出保存。
????? 使用时敲minicom命令
?
二、fastboot安装
??????? 先下载fastboot工具，一般编译工具里自带。下面就root用户下安装讨论。
??????? 建个51-android.rules文件，内容如下：
??????? # adb protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="0002", MODE="0600", OWNER="uarmchen"
# fastboot protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="uarmchen"
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="<uarmchen>"
# adb protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="<uarmchen>"
# adb protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="<uarmchen>"
# adb protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="<uarmchen>"
# fastboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="<uarmchen>"
# usbboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="<uarmchen>"
????? 连设备时，用lsusb命令查看idVendor和idProduct，添加一组。
????? 之后将51-android.rules文件复制到/etc/udev/rules.d/ 目录下。
????? 在～/.bashrc文件里添加fastboot工具放的位置，如export PATH=$PATH:/home/uarmchen/tools
?????这样不用在fastboot命令前带sudo了。
