SIPp命令参数
?sipp remote_host[:remote_port] [options]
?
? Available options:
? ?-v ? ? ? ? ? ? ? : Display version and copyright information. ? ；显示版本号与版权信息
? ?-aa ? ? ? ? ? ? ?: Enable automatic 200 OK answer for INFO, UPDATE and ；对 INFO ,UPDATE，NOTIFY 回复 200OK
? ? ? ? ? ? ? ? ? ? ? NOTIFY messages.
? ?-auth_uri ? ? ? ?: Force the value of the URI for authentication. ? ；验证 URI
? ? ? ? ? ? ? ? ? ? ? By default, the URI is composed of ? ?；默认情况下 URI 由
? ? ? ? ? ? ? ? ? ? ? remote_ip:remote_port. ? ? ；remote_ip:remote_port 组成
? ?-base_cseq ? ? ? : Start value of [cseq] for each call. ? ?；互相送 cseq 起始值
? ?-bg ? ? ? ? ? ? ?: Launch SIPp in background mode. ? ?；运行 sipp 在后台模式
? ?-bind_local ? ? ?: Bind socket to local IP address, i.e. the local IP ? ；绑定本地IP与端口，本地IP地址会使用
? ? ? ? ? ? ? ? ? ? ? address is used as the source IP address. ?If SIPp runs ；源Ip 地址。如果sipp运行在UAS模式
? ? ? ? ? ? ? ? ? ? ? in server mode it will only listen on the local IP ?；它仅会监听本地端口
? ? ? ? ? ? ? ? ? ? ? address instead of all IP addresses.
? ?-buff_size ? ? ? : Set the send and receive buffer size. ? ?；设定发送与接收的缓冲区大小
? ?-calldebug_file ?: Set the name of the call debug file. ? ?；设定debug文件名
? ?-calldebug_overwrite: Overwrite the call debug file (default true). ? ；重写呼叫 debug 文件名，
? ?-cid_str ? ? ? ? : Call ID string (default %u-%p@%s). ?%u=call_number, ?；呼叫 字符串 （默认是%u-%p@%s）
? ? ? ? ? ? ? ? ? ? ? %s=ip_address, %p=process_number, %%=% (in any order). ；%u=call_number %s=ip_address %p=process_number %%=%(in any order)
? ?-ci ? ? ? ? ? ? ?: Set the local control IP address ? ?；设定本地管理IP地址
? ?-cp ? ? ? ? ? ? ?: Set the local control port number. Default is 8888. ?；设定本地管理 端口 默认 8888
? ?-d ? ? ? ? ? ? ? : Controls the length of calls. More precisely, this ?；控制呼叫时间
? ? ? ? ? ? ? ? ? ? ? controls the duration of 'pause' instructions in the ?；两次呼叫的中间时间
? ? ? ? ? ? ? ? ? ? ? scenario, if they do not have a 'milliseconds' section. ?；如果没有设定 毫秒级的间隔
? ? ? ? ? ? ? ? ? ? ? Default value is 0 and default unit is milliseconds. ?；默认值为 0，单位是 毫秒
? ?-deadcall_wait ? : How long the Call-ID and final status of calls should be ?；设定bug提醒之间延时
? ? ? ? ? ? ? ? ? ? ? kept to improve message and error logs (default unit is ；单位为 ms
? ? ? ? ? ? ? ? ? ? ? ms).
? ?-default_behaviors: Set the default behaviors that SIPp will use. ?Possbile ?；设定Sipp的默认行为 ：
? ? ? ? ? ? ? ? ? ? ? values are:
? ? ? ? ? ? ? ? ? ? ? - all ? ? Use all default behaviors ? ?；使用默认行为
? ? ? ? ? ? ? ? ? ? ? - none ? ?Use no default behaviors ? ?；不使用默认行为
? ? ? ? ? ? ? ? ? ? ? - bye ? ? Send byes for aborted calls ? ；默认送 bye
? ? ? ? ? ? ? ? ? ? ? - abortunexp ? ? ?Abort calls on unexpected messages ；终止 意外的呼叫
? ? ? ? ? ? ? ? ? ? ? - pingreply ? ? ? Reply to ping requests ? ；回复Ping 请求
? ? ? ? ? ? ? ? ? ? ? If a behavior is prefaced with a -, then it is turned ?；添加一个 - ，则代表关闭此功能
? ? ? ? ? ? ? ? ? ? ? off. ?Example: all,-bye ? ? ；如 ，all，-bye
? ? ? ? ? ? ? ? ? ? ?
? ?-error_file ? ? ?: Set the name of the error log file. ? ?；设定error log 文件名
? ?-error_overwrite : Overwrite the error log file (default true). ? ；重写 error log 文件
? ?-f ? ? ? ? ? ? ? : Set the statistics report frequency on screen. Default is ?；设定在屏幕上显示的统计报告
? ? ? ? ? ? ? ? ? ? ? 1 and default unit is seconds. ? ?；默认是 1， 时间为秒
? ?-fd ? ? ? ? ? ? ?: Set the statistics dump log report frequency. Default is ?；设定转储日志的时间与单位
? ? ? ? ? ? ? ? ? ? ? 60 and default unit is seconds. ? ?；默认是 60 s
? ?-i ? ? ? ? ? ? ? : Set the local IP address for 'Contact:','Via:', and ?；设定本地IP地址，用在 ‘Contact：’‘Via：’‘From：’
? ? ? ? ? ? ? ? ? ? ? 'From:' headers. Default is primary host IP address. ?；头域， 默认是主机Ip 地址
? ? ? ? ? ? ? ? ? ? ?
? ?-inf ? ? ? ? ? ? : Inject values from an external CSV file during calls into ?；载入 CSV 场景文件
? ? ? ? ? ? ? ? ? ? ? the scenarios.
? ? ? ? ? ? ? ? ? ? ? First line of this file say whether the data is to be ?；SEQUENTIAL
? ? ? ? ? ? ? ? ? ? ? read in sequence (SEQUENTIAL), random (RANDOM), or user ；RANDOM
? ? ? ? ? ? ? ? ? ? ? (USER) order. ? ? ?；USER
? ? ? ? ? ? ? ? ? ? ? Each line corresponds to one call and has one or more
? ? ? ? ? ? ? ? ? ? ? ';' delimited data fields. Those fields can be referred
? ? ? ? ? ? ? ? ? ? ? as [field0], [field1], ... in the xml scenario file.?
? ? ? ? ? ? ? ? ? ? ? Several CSV files can be used simultaneously (syntax:
? ? ? ? ? ? ? ? ? ? ? -inf f1.csv -inf f2.csv ...)
? ?-infindex ? ? ? ?: file field ? ? ? ；创建索引的引用段
? ? ? ? ? ? ? ? ? ? ? Create an index of file using field. ?For example -inf ?；范例
? ? ? ? ? ? ? ? ? ? ? users.csv -infindex users.csv 0 creates an index on the ?；
? ? ? ? ? ? ? ? ? ? ? first key.
? ?-ip_field ? ? ? ?: Set which field from the injection file contains the IP ?；设定引用的文件中
? ? ? ? ? ? ? ? ? ? ? address from which the client will send its messages. ?；用来 送出IP 字段关键字
? ? ? ? ? ? ? ? ? ? ? If this option is omitted and the '-t ui' option is ?；如果这个设置被忽略并且 ‘-t ui’设置
? ? ? ? ? ? ? ? ? ? ? present, then field 0 is assumed. ? ?；则假设 字段 为 0
? ? ? ? ? ? ? ? ? ? ? Use this option together with '-t ui' ? ?；使用时 一般会 带有 ‘-t ui’
? ?-l ? ? ? ? ? ? ? : Set the maximum number of simultaneous calls. Once this ；设定并发呼叫数
? ? ? ? ? ? ? ? ? ? ? limit is reached, traffic is decreased until the number ?；
? ? ? ? ? ? ? ? ? ? ? of open calls goes down. Default: ? ?；
? ? ? ? ? ? ? ? ? ? ? ? (3 * call_duration (s) * rate). ? ?；默认 ：(3 * call_duration (s) * rate).
? ?-log_file ? ? ? ?: Set the name of the log actions log file.
? ?-log_overwrite ? : Overwrite the log actions log file (default true).
? ?-lost ? ? ? ? ? ?: Set the number of packets to lose by default (scenario ?；设定没有场景文件如何拨打号码
? ? ? ? ? ? ? ? ? ? ? specifications override this value). ? ?；场景文件会覆盖此设置
? ?-rtcheck ? ? ? ? : Select the retransmisison detection method: full ?；设定 检查 RTP 语音流 full / loose
? ? ? ? ? ? ? ? ? ? ? (default) or loose. ? ? ?；默认为 full
? ?-m ? ? ? ? ? ? ? : Stop the test and exit when 'calls' calls are processed ?；停止呼叫的次数
? ?-mi ? ? ? ? ? ? ?: Set the local media IP address (default: local primary ?；设定本地 media IP address
? ? ? ? ? ? ? ? ? ? ? host IP address)
? ?-master ? ? ? ? ?: 3pcc extended mode: indicates the master number ?
? ?-max_recv_loops ?: Set the maximum number of messages received read per
? ? ? ? ? ? ? ? ? ? ? cycle. Increase this value for high traffic level. ?The
? ? ? ? ? ? ? ? ? ? ? default value is 1000.
? ?-max_sched_loops : Set the maximum number of calsl run per event loop.
? ? ? ? ? ? ? ? ? ? ? Increase this value for high traffic level. ?The default
? ? ? ? ? ? ? ? ? ? ? value is 1000.
? ?-max_reconnect ? : Set the the maximum number of reconnection.
? ?-max_retrans ? ? : Maximum number of UDP retransmissions before call ends on
? ? ? ? ? ? ? ? ? ? ? timeout. ?Default is 5 for INVITE transactions and 7 for
? ? ? ? ? ? ? ? ? ? ? others.
? ?-max_invite_retrans: Maximum number of UDP retransmissions for invite
? ? ? ? ? ? ? ? ? ? ? transactions before call ends on timeout.
? ?-max_non_invite_retrans: Maximum number of UDP retransmissions for non-invite
? ? ? ? ? ? ? ? ? ? ? transactions before call ends on timeout.
? ?-max_log_size ? ?: What is the limit for error and message log file sizes.
? ?-max_socket ? ? ?: Set the max number of sockets to open simultaneously.
? ? ? ? ? ? ? ? ? ? ? This option is significant if you use one socket per
? ? ? ? ? ? ? ? ? ? ? call. Once this limit is reached, traffic is distributed
? ? ? ? ? ? ? ? ? ? ? over the sockets already opened. Default value is 50000
? ?-mb ? ? ? ? ? ? ?: Set the RTP echo buffer size (default: 2048).
? ?-message_file ? ?: Set the name of the message log file.
? ?-message_overwrite: Overwrite the message log file (default true).
? ?-mp ? ? ? ? ? ? ?: Set the local RTP echo port number. Default is 6000. ? ；设定本地RTP端口，默认6000
? ?-nd ? ? ? ? ? ? ?: No Default. Disable all default behavior of SIPp which ? ；使用 没有默认行为的 SIPp
? ? ? ? ? ? ? ? ? ? ? are the following:
? ? ? ? ? ? ? ? ? ? ? - On UDP retransmission timeout, abort the call by ? ；RTP语音超时
? ? ? ? ? ? ? ? ? ? ? ? sending a BYE or a CANCEL ? ? ；自动发送 BYE or CANCEL
? ? ? ? ? ? ? ? ? ? ? - On receive timeout with no ontimeout attribute, abort ?；接收超时无超时属性，
? ? ? ? ? ? ? ? ? ? ? ? the call by sending a BYE or a CANCEL ? ?；发送 BYE or CANCEL
? ? ? ? ? ? ? ? ? ? ? - On unexpected BYE send a 200 OK and close the call ?；回200 OK 给 BYE消息
? ? ? ? ? ? ? ? ? ? ? - On unexpected CANCEL send a 200 OK and close the call ?；回200 OK 给 CANCEL消息
? ? ? ? ? ? ? ? ? ? ? - On unexpected PING send a 200 OK and continue the call ?；回200 OK 给 PING 消息并继续通话
? ? ? ? ? ? ? ? ? ? ? - On any other unexpected message, abort the call by ?；其他的意外消息 ，发送BYE or CANCEL
? ? ? ? ? ? ? ? ? ? ? ? sending a BYE or a CANCEL ? ? ；回应并结束通话
? ? ? ? ? ? ? ? ? ? ?
? ?-nr ? ? ? ? ? ? ?: Disable retransmission in UDP mode. ? ? ；禁止使用 UDP 重发模式
? ?-nostdin ? ? ? ? : Disable stdin. ? ? ? ；no stdin
? ? ? ? ? ? ? ? ? ? ??
? ?-p ? ? ? ? ? ? ? : Set the local port number. ?Default is a random free port ?；设定本地端口
? ? ? ? ? ? ? ? ? ? ? chosen by the system. ? ? ?；默认使用一个空闲的端口
? ?-pause_msg_ign ? : Ignore the messages received during a pause defined in ?；忽略在暂停时场景文件对
? ? ? ? ? ? ? ? ? ? ? the scenario ? ? ? ?；消息体的返回
? ?-periodic_rtd ? ?: Reset response time partition counters each logging ? ；重置每个分区响应计时器
? ? ? ? ? ? ? ? ? ? ? interval. ? ? ? ?；在每个日志记录间隔
? ?-plugin ? ? ? ? ?: Load a plugin. ? ? ? ；加载插件。。插件？
? ?-r ? ? ? ? ? ? ? : Set the call rate (in calls per seconds). ?This value can ? ；设置默认的 拨打时间 （呼叫/秒）
? ? ? ? ? ? ? ? ? ? ? bechanged during test by pressing '+','_','*' or '/'.
? ? ? ? ? ? ? ? ? ? ? Default is 10. ? ? ? ；默认是10
? ? ? ? ? ? ? ? ? ? ? pressing '+' key to increase call rate by 1 * ? ?；+ 加快1 个呼叫
? ? ? ? ? ? ? ? ? ? ? rate_scale,
? ? ? ? ? ? ? ? ? ? ? pressing '-' key to decrease call rate by 1 * ? ?；- 降低1 个呼叫
? ? ? ? ? ? ? ? ? ? ? rate_scale,
? ? ? ? ? ? ? ? ? ? ? pressing '*' key to increase call rate by 10 * ? ?；* 加快10 个呼叫
? ? ? ? ? ? ? ? ? ? ? rate_scale,
? ? ? ? ? ? ? ? ? ? ? pressing '/' key to decrease call rate by 10 * ? ?；/ 降低10 个呼叫
? ? ? ? ? ? ? ? ? ? ? rate_scale.
? ? ? ? ? ? ? ? ? ? ? If the -rp option is used, the call rate is calculated ? ；如果加上 -rp这个参数
? ? ? ? ? ? ? ? ? ? ? with the period in ms given by the user. ? ?；将会计算出每秒用户调用率
? ?-rp ? ? ? ? ? ? ?: Specify the rate period for the call rate. ?Default is 1 ? ；指定的 通话周期换用调用率
? ? ? ? ? ? ? ? ? ? ? second and default unit is milliseconds. ?This allows ? ；默认是 1s 单位是 ms
? ? ? ? ? ? ? ? ? ? ? you to have n calls every m milliseconds (by using -r n ?；这个选项将会让你设置 n个呼叫 /每毫秒
? ? ? ? ? ? ? ? ? ? ? -rp m).
? ? ? ? ? ? ? ? ? ? ? Example: -r 7 -rp 2000 ==> 7 calls every 2 seconds. ? ；-r 7 -rp 2000 每2000ms 7个呼叫
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?-r 10 -rp 5s => 10 calls every 5 seconds. ? ；-r 10 -rp 5s 每5s 10个呼叫
? ?-rate_scale ? ? ?: Control the units for the '+', '-', '*', and '/' keys.
? ?-rate_increase ? : Specify the rate increase every -fd units (default is
? ? ? ? ? ? ? ? ? ? ? seconds). ?This allows you to increase the load for each
? ? ? ? ? ? ? ? ? ? ? independent logging period.
? ? ? ? ? ? ? ? ? ? ? Example: -rate_increase 10 -fd 10s
? ? ? ? ? ? ? ? ? ? ? ? ==> increase calls by 10 every 10 seconds.
? ?-rate_max ? ? ? ?: If -rate_increase is set, then quit after the rate
? ? ? ? ? ? ? ? ? ? ? reaches this value.
? ? ? ? ? ? ? ? ? ? ? Example: -rate_increase 10 -rate_max 100
? ? ? ? ? ? ? ? ? ? ? ? ==> increase calls by 10 until 100 cps is hit.
? ?-no_rate_quit ? ?: If -rate_increase is set, do not quit after the rate
? ? ? ? ? ? ? ? ? ? ? reaches -rate_max.
? ?-recv_timeout ? ?: Global receive timeout. Default unit is milliseconds. If
? ? ? ? ? ? ? ? ? ? ? the expected message is not received, the call times out
? ? ? ? ? ? ? ? ? ? ? and is aborted.
? ?-send_timeout ? ?: Global send timeout. Default unit is milliseconds. If a
? ? ? ? ? ? ? ? ? ? ? message is not sent (due to congestion), the call times
? ? ? ? ? ? ? ? ? ? ? out and is aborted.
? ?-sleep ? ? ? ? ? : How long to sleep for at startup. Default unit is
? ? ? ? ? ? ? ? ? ? ? seconds.
? ?-reconnect_close : Should calls be closed on reconnect?
? ?-reconnect_sleep : How long (in milliseconds) to sleep between the close and
? ? ? ? ? ? ? ? ? ? ? reconnect?
? ?-ringbuffer_files: How many error/message files should be kept after
? ? ? ? ? ? ? ? ? ? ? rotation?
? ?-ringbuffer_size : How large should error/message files be before they get
? ? ? ? ? ? ? ? ? ? ? rotated?
? ?-rsa ? ? ? ? ? ? : Set the remote sending address to host:port for sending ；？？设定远程发送 地址与端口
? ? ? ? ? ? ? ? ? ? ? the messages.
? ?-rtp_echo ? ? ? ?: Enable RTP echo. RTP/UDP packets received on port defined ；开启 RTP 回升。 将接受的 RTP 包
? ? ? ? ? ? ? ? ? ? ? by -mp are echoed to their sender. ? ?；回传到发送者
? ? ? ? ? ? ? ? ? ? ? RTP/UDP packets coming on this port + 2 are also echoed?
? ? ? ? ? ? ? ? ? ? ? to their sender (used for sound and video echo).
? ?-rtt_freq ? ? ? ?: freq is mandatory. Dump response times every freq calls
? ? ? ? ? ? ? ? ? ? ? in the log file defined by -trace_rtt. Default value is
? ? ? ? ? ? ? ? ? ? ? 200.
? ?-s ? ? ? ? ? ? ? : Set the username part of the resquest URI. Default is ?；设定 resquest URI 的username 部分
? ? ? ? ? ? ? ? ? ? ? 'service'. ? ? ? ；默认是 ?service
? ?-sd ? ? ? ? ? ? ?: Dumps a default scenario (embeded in the sipp executable)
? ?-sf ? ? ? ? ? ? ?: Loads an alternate xml scenario file. ?To learn more
? ? ? ? ? ? ? ? ? ? ? about XML scenario syntax, use the -sd option to dump
? ? ? ? ? ? ? ? ? ? ? embedded scenarios. They contain all the necessary help.
? ?-shortmessage_file: Set the name of the short message log file.
? ?-shortmessage_overwrite: Overwrite the short message log file (default true).
? ?-oocsf ? ? ? ? ? : Load out-of-call scenario.
? ?-oocsn ? ? ? ? ? : Load out-of-call scenario.
? ?-skip_rlimit ? ? : Do not perform rlimit tuning of file descriptor limits.?
? ? ? ? ? ? ? ? ? ? ? Default: false.
? ?-slave ? ? ? ? ? : 3pcc extended mode: indicates the slave number
? ?-slave_cfg ? ? ? : 3pcc extended mode: indicates the file where the master
? ? ? ? ? ? ? ? ? ? ? and slave addresses are stored
? ?-sn ? ? ? ? ? ? ?: Use a default scenario (embedded in the sipp executable). ；使用默认的场景文件
? ? ? ? ? ? ? ? ? ? ? If this option is omitted, the Standard SipStone UAC ?；如果没设定场景文件又没设置这个参数
? ? ? ? ? ? ? ? ? ? ? scenario is loaded. ? ? ?；将会默认使用 UAC
? ? ? ? ? ? ? ? ? ? ? Available values in this version:
? ? ? ? ? ? ? ? ? ? ??
? ? ? ? ? ? ? ? ? ? ? - 'uac' ? ? ?: Standard SipStone UAC (default).
? ? ? ? ? ? ? ? ? ? ? - 'uas' ? ? ?: Simple UAS responder.
? ? ? ? ? ? ? ? ? ? ? - 'regexp' ? : Standard SipStone UAC - with regexp and
? ? ? ? ? ? ? ? ? ? ? ? variables.
? ? ? ? ? ? ? ? ? ? ? - 'branchc' ?: Branching and conditional branching in
? ? ? ? ? ? ? ? ? ? ? ? scenarios - client.
? ? ? ? ? ? ? ? ? ? ? - 'branchs' ?: Branching and conditional branching in
? ? ? ? ? ? ? ? ? ? ? ? scenarios - server.
? ? ? ? ? ? ? ? ? ? ??
? ? ? ? ? ? ? ? ? ? ? Default 3pcc scenarios (see -3pcc option):
? ? ? ? ? ? ? ? ? ? ??
? ? ? ? ? ? ? ? ? ? ? - '3pcc-C-A' : Controller A side (must be started after
? ? ? ? ? ? ? ? ? ? ? ? all other 3pcc scenarios)
? ? ? ? ? ? ? ? ? ? ? - '3pcc-C-B' : Controller B side.
? ? ? ? ? ? ? ? ? ? ? - '3pcc-A' ? : A side.
? ? ? ? ? ? ? ? ? ? ? - '3pcc-B' ? : B side.
? ? ? ? ? ? ? ? ? ? ?
? ?-stat_delimiter ?: Set the delimiter for the statistics file
? ?-stf ? ? ? ? ? ? : Set the file name to use to dump statistics
? ?-t ? ? ? ? ? ? ? : Set the transport mode: ? ?； 设定传输模式
? ? ? ? ? ? ? ? ? ? ? - u1: UDP with one socket (default), ? ；u1 UDP 一个端口传输 默认
? ? ? ? ? ? ? ? ? ? ? - un: UDP with one socket per call, ? ；un UDP 每个通话每个端口
? ? ? ? ? ? ? ? ? ? ? - ui: UDP with one socket per IP address The IP ；ui UDP 每一个定义的IP 地址
? ? ? ? ? ? ? ? ? ? ? ? addresses must be defined in the injection file. ；每个端口
? ? ? ? ? ? ? ? ? ? ? - t1: TCP with one socket,
? ? ? ? ? ? ? ? ? ? ? - tn: TCP with one socket per call,
? ? ? ? ? ? ? ? ? ? ? - l1: TLS with one socket,
? ? ? ? ? ? ? ? ? ? ? - ln: TLS with one socket per call,
? ? ? ? ? ? ? ? ? ? ? - c1: u1 + compression (only if compression plugin
? ? ? ? ? ? ? ? ? ? ? ? loaded),
? ? ? ? ? ? ? ? ? ? ? - cn: un + compression (only if compression plugin
? ? ? ? ? ? ? ? ? ? ? ? loaded). ?This plugin is not provided with sipp.
? ? ? ? ? ? ? ? ? ? ??
? ?-timeout ? ? ? ? : Global timeout. Default unit is seconds. ?If this option
? ? ? ? ? ? ? ? ? ? ? is set, SIPp quits after nb units (-timeout 20s quits
? ? ? ? ? ? ? ? ? ? ? after 20 seconds).
? ?-timeout_error ? : SIPp fails if the global timeout is reached is set
? ? ? ? ? ? ? ? ? ? ? (-timeout option required).
? ?-timer_resol ? ? : Set the timer resolution. Default unit is milliseconds.?
? ? ? ? ? ? ? ? ? ? ? This option has an impact on timers precision.Small
? ? ? ? ? ? ? ? ? ? ? values allow more precise scheduling but impacts CPU
? ? ? ? ? ? ? ? ? ? ? usage.If the compression is on, the value is set to
? ? ? ? ? ? ? ? ? ? ? 50ms. The default value is 10ms.
? ?-T2 ? ? ? ? ? ? ?: Global T2-timer in milli seconds
? ?-sendbuffer_warn : Produce warnings instead of errors on SendBuffer
? ? ? ? ? ? ? ? ? ? ? failures.
? ?-trace_msg ? ? ? : Displays sent and received SIP messages in <scenario file
? ? ? ? ? ? ? ? ? ? ? name>_<pid>_messages.log
? ?-trace_shortmsg ?: Displays sent and received SIP messages as CSV in
? ? ? ? ? ? ? ? ? ? ? <scenario file name>_<pid>_shortmessages.log
? ?-trace_screen ? ?: Dump statistic screens in the
? ? ? ? ? ? ? ? ? ? ? <scenario_name>_<pid>_screens.log file when
? ? ? ? ? ? ? ? ? ? ? quitting SIPp. Useful to get a final status report in
? ? ? ? ? ? ? ? ? ? ? background mode (-bg option).
? ?-trace_err ? ? ? : Trace all unexpected messages in <scenario file
? ? ? ? ? ? ? ? ? ? ? name>_<pid>_errors.log.
? ?-trace_calldebug : Dumps debugging information about aborted calls to
? ? ? ? ? ? ? ? ? ? ? <scenario_name>_<pid>_calldebug.log file.
? ?-trace_stat ? ? ?: Dumps all statistics in <scenario_name>_<pid>.csv file.
? ? ? ? ? ? ? ? ? ? ? Use the '-h stat' option for a detailed description of
? ? ? ? ? ? ? ? ? ? ? the statistics file content.
? ?-trace_counts ? ?: Dumps individual message counts in a CSV file.
? ?-trace_rtt ? ? ? : Allow tracing of all response times in <scenario file
? ? ? ? ? ? ? ? ? ? ? name>_<pid>_rtt.csv.
? ?-trace_logs ? ? ?: Allow tracing of <log> actions in <scenario file
? ? ? ? ? ? ? ? ? ? ? name>_<pid>_logs.log.
? ?-users ? ? ? ? ? : Instead of starting calls at a fixed rate, begin 'users'
? ? ? ? ? ? ? ? ? ? ? calls at startup, and keep the number of calls constant.
? ?-watchdog_interval: Set gap between watchdog timer firings. ?Default is 400. ?；设定看门狗计时器 默认400
? ?-watchdog_reset ?: If the watchdog timer has not fired in more than this
? ? ? ? ? ? ? ? ? ? ? time period, then reset the max triggers counters.?
? ? ? ? ? ? ? ? ? ? ? Default is 10 minutes.
? ?-watchdog_minor_threshold: If it has been longer than this period between watchdog
? ? ? ? ? ? ? ? ? ? ? executions count a minor trip. ?Default is 500.
? ?-watchdog_major_threshold: If it has been longer than this period between watchdog
? ? ? ? ? ? ? ? ? ? ? executions count a major trip. ?Default is 3000.
? ?-watchdog_major_maxtriggers: How many times the major watchdog timer can be tripped
? ? ? ? ? ? ? ? ? ? ? before the test is terminated. ?Default is 10.
? ?-watchdog_minor_maxtriggers: How many times the minor watchdog timer can be tripped
? ? ? ? ? ? ? ? ? ? ? before the test is terminated. ?Default is 120.
? ?-ap ? ? ? ? ? ? ?: Set the password for authentication challenges. Default
? ? ? ? ? ? ? ? ? ? ? is 'password
? ?-tls_cert ? ? ? ?: Set the name for TLS Certificate file. Default is
? ? ? ? ? ? ? ? ? ? ? 'cacert.pem
? ?-tls_key ? ? ? ? : Set the name for TLS Private Key file. Default is
? ? ? ? ? ? ? ? ? ? ? 'cakey.pem'
? ?-tls_crl ? ? ? ? : Set the name for Certificate Revocation List file. If not
? ? ? ? ? ? ? ? ? ? ? specified, X509 CRL is not activated.
? ?-3pcc ? ? ? ? ? ?: Launch the tool in 3pcc mode ("Third Party call ?； 启动 3pcc 工具
? ? ? ? ? ? ? ? ? ? ? control"). The passed ip address is depending on the ?；？？？？？？
? ? ? ? ? ? ? ? ? ? ? 3PCC role.
? ? ? ? ? ? ? ? ? ? ? - When the first twin command is 'sendCmd' then this is
? ? ? ? ? ? ? ? ? ? ? ? the address of the remote twin socket. ?SIPp will try to
? ? ? ? ? ? ? ? ? ? ? ? connect to this address:port to send the twin command
? ? ? ? ? ? ? ? ? ? ? ? (This instance must be started after all other 3PCC
? ? ? ? ? ? ? ? ? ? ? ? scenarii).
? ? ? ? ? ? ? ? ? ? ? ? ? Example: 3PCC-C-A scenario.
? ? ? ? ? ? ? ? ? ? ? - When the first twin command is 'recvCmd' then this is
? ? ? ? ? ? ? ? ? ? ? ? the address of the local twin socket. SIPp will open
? ? ? ? ? ? ? ? ? ? ? ? this address:port to listen for twin command.
? ? ? ? ? ? ? ? ? ? ? ? ? Example: 3PCC-C-B scenario.
? ?-tdmmap ? ? ? ? ?: Generate and handle a table of TDM circuits.
? ? ? ? ? ? ? ? ? ? ? A circuit must be available for the call to be placed.
? ? ? ? ? ? ? ? ? ? ? Format: -tdmmap {0-3}{99}{5-8}{1-31}
? ?-key ? ? ? ? ? ? : keyword value
? ? ? ? ? ? ? ? ? ? ? Set the generic parameter named "keyword" to "value".
? ?-set ? ? ? ? ? ? : variable value
? ? ? ? ? ? ? ? ? ? ? Set the global variable parameter named "variable" to
? ? ? ? ? ? ? ? ? ? ? "value".
? ?-dynamicStart ? ?: variable value
? ? ? ? ? ? ? ? ? ? ? Set the start offset of dynamic_id varaiable
? ?-dynamicMax ? ? ?: variable value
? ? ? ? ? ? ? ? ? ? ? Set the maximum of dynamic_id variable ? ?
? ?-dynamicStep ? ? : variable value
? ? ? ? ? ? ? ? ? ? ? Set the increment of dynamic_id variable
Signal handling:
? ?SIPp can be controlled using posix signals. The following signals
? ?are handled:
? ?USR1: Similar to press 'q' keyboard key. It triggers a soft exit
? ? ? ? ?of SIPp. No more new calls are placed and all ongoing calls
? ? ? ? ?are finished before SIPp exits.
? ? ? ? ?Example: kill -SIGUSR1 732
? ?USR2: Triggers a dump of all statistics screens in
? ? ? ? ?<scenario_name>_<pid>_screens.log file. Especially useful?
? ? ? ? ?in background mode to know what the current status is.
? ? ? ? ?Example: kill -SIGUSR2 732
Exit code:
? ?Upon exit (on fatal error or when the number of asked calls (-m
? ?option) is reached, sipp exits with one of the following exit
? ?code:
? ? 0: All calls were successful
? ? 1: At least one call failed
? ?97: exit on internal command. Calls may have been processed
? ?99: Normal exit without calls processed
? ?-1: Fatal error
? ?-2: Fatal error binding a socket
?
Example:
? ?Run sipp with embedded server (uas) scenario:
? ? ?./sipp -sn uas
? ?On the same host, run sipp with embedded client (uac) scenario
? ? ?./sipp -sn uac 127.0.0.1
