s3c2440触摸屏驱动,该如何解决

s3c2440触摸屏驱动
刚开始学习驱动,测试的时候发现第一次打开没问题,但第2次打开却没反应了.
大家帮忙看看可能是什么原因
下面是部分代码:

C/C++ code

static int s3c2410_ts_open(struct inode *inode, struct file *filp){    TS_DEV *devp;        devp = container_of(inode->i_cdev, TS_DEV, cdev);        filp->private_data = devp;        /* 创建等待队列和环形缓冲区 */        devp->head = devp->tail = 0;    devp->penStatus = PEN_UP;    init_waitqueue_head(&(devp->wq));        /* 注册中断 */        if (request_irq(IRQ_ADC, stylus_action, IRQF_SHARED,    /* 共享中断 */         "s3c2410_action", &(devp->cdev))) {        printk(KERN_ERR "Could not allocate ts IRQ_ADC\n");        return -EIO;    }    if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,        "s3c241_updown", &(devp->cdev))) {        printk(KERN_ERR "Could not allocate ts IRQ_TC\n");        return -EIO;        }        DPRINTK("ts opened\n");        return 0;}static int s3c2410_ts_release(struct inode *inode, struct file *filp){    TS_DEV *devp = filp->private_data;        disable_irq(IRQ_ADC);    disable_irq(IRQ_TC);    free_irq(IRQ_TC,&(devp->cdev));    free_irq(IRQ_ADC,&(devp->cdev));        DPRINTK("ts released\n");        return 0;}static int __init s3c2410_ts_init(void){    int ret;    adc_clock = clk_get(NULL, "adc");    if (!adc_clock) {        printk(KERN_ERR "Faild to get adc clock source\n");        return -ENOENT;    }    clk_enable(adc_clock);        base_addr = ioremap(S3C2410_PA_ADC, 0x20);    if (base_addr == NULL) {        printk(KERN_ERR "Fiald to remap register block\n");        return -ENOMEM;    }        /* Config GPIOs */    s3c2410_ts_connect();        iowrite32(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(0xFF),\             base_addr+S3C2410_ADCCON);    iowrite32(0xffff,  base_addr+S3C2410_ADCDLY);    iowrite32(WAIT4INT(0), base_addr+S3C2410_ADCTSC);        /* Register char device */        if (alloc_chrdev_region(&tsdev_number, 0, 1, DEVICE_NAME) < 0) {        printk(KERN_DEBUG "Can not register device\n");        return -1;    }        tsdev_class = class_create(THIS_MODULE, DEVICE_NAME);        tsdev = kmalloc(sizeof(TS_DEV), GFP_KERNEL);    if (!tsdev) {        printk(KERN_ERR "Bad kmalloc\n");        return -ENOMEM;    }        cdev_init(&tsdev->cdev, &tsdev_fops);    tsdev->cdev.owner = THIS_MODULE;        ret = cdev_add(&tsdev->cdev, tsdev_number, 1);    if (ret) {        printk(KERN_ERR "Bad cdev\n");        return ret;    }        device_create(tsdev_class, NULL, tsdev_number, 0, "my-ts");        DPRINTK("Loading Module my-ts Success..\n");        return 0;}static void __exit s3c2410_ts_exit(void){    if (adc_clock) {        clk_disable(adc_clock);        clk_put(adc_clock);        adc_clock = 0;    }        /* Unregister devce */        unregister_chrdev_region(tsdev_number, 1);    device_destroy(tsdev_class, tsdev_number);    cdev_del(&tsdev->cdev);    kfree(tsdev);    class_destroy(tsdev_class);         iounmap(base_addr);        DPRINTK("Unloading Module my-ts Success..\n");}

在重新加载模块后第一次打开发现它在打开ADC转换中断后不再相应ADC转换中断
iowrite32(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC);
iowrite32(ioread32(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, 
  base_addr+S3C2410_ADCCON);
同样第2次打开,触摸屏中断IRQ_TC和ADC中断IRQ_ADC都不响应
只有重启系统后第一次打开没任何问题
打开设备后系统中断如下:
[root@FriendlyARM driver]# cat /proc/interrupts 
  CPU0
 30: 25085 s3c S3C2410 Timer Tick
 32: 0 s3c s3c2410-lcd
 33: 0 s3c s3c-mci
 37: 21 s3c s3c-mci

 42: 0 s3c ohci_hcd:usb1
 43: 0 s3c s3c2440-i2c
 51: 2637 s3c-ext eth0
 60: 0 s3c-ext s3c-mci
 70: 99 s3c-uart0 s3c2440-uart
 71: 214 s3c-uart0 s3c2440-uart
 79: 4 s3c-adc s3c241_updown
 80: 68 s3c-adc adc, s3c2410_action
 83: 0 - s3c2410-wdt
Err: 0

79和80分别是IRQ_TC和IRQ_ADC

[解决办法]
IRQ_ADC 的中断有没有设置成共享中断

查看更多 下一篇