用vfw 写视频会议 ，但是画图 画不出来
我用vfw 写的一个视频会议
参照前人的一些代码
但是 我的 DrawDibDraw 这个函数 貌似一直不管用，都不将数据 画到 bitmap 中去
客户端得到的图片都是空白的
代码如下 ：
客户端
DrawDibDraw
unit Unit1;
interface
uses
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
Dialogs, StdCtrls, ExtCtrls, VFW, IdBaseComponent, IdComponent, IdUDPBase,
IdUDPClient, jpeg, pngimage;
type
TForm1 = class(TForm)
pnl1: TPanel;
btn1: TButton;
btn2: TButton;
IdUDPClient1: TIdUDPClient;
mmo1: TMemo;
btn3: TButton;
procedure btn1Click(Sender: TObject);
procedure btn2Click(Sender: TObject);
procedure btn3Click(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
CapWnd: THandle; //定义捕捉窗句柄
CapParms: TcaptureParms; //用于设置设备属性的结构变量
BMPINFO: TBitmapInfo; //BMP图像信息
lpVHdr: PVIDEOHDR;
implementation
{$R *.dfm}
const WM_CAP_START = WM_USER;
const WM_CAP_STOP = WM_CAP_START + 68;
const WM_CAP_DRIVER_CONNECT = WM_CAP_START + 10;
const WM_CAP_DRIVER_DISCONNECT = WM_CAP_START + 11;
const WM_CAP_SAVEDIB = WM_CAP_START + 25;
const WM_CAP_GRAB_FRAME = WM_CAP_START + 60;
const WM_CAP_SEQUENCE = WM_CAP_START + 62;
const WM_CAP_FILE_SET_CAPTURE_FILEA = WM_CAP_START + 20;
const WM_CAP_SEQUENCE_NOFILE =WM_CAP_START+ 63 ;
const WM_CAP_SET_OVERLAY =WM_CAP_START+ 51 ;
const WM_CAP_SET_PREVIEW =WM_CAP_START+ 50 ;
const WM_CAP_SET_CALLBACK_VIDEOSTREAM = WM_CAP_START +6;
const WM_CAP_SET_CALLBACK_ERROR=WM_CAP_START +2;
const WM_CAP_SET_CALLBACK_STATUSA= WM_CAP_START +3;
const WM_CAP_SET_CALLBACK_FRAME= WM_CAP_START +5;
const WM_CAP_SET_SCALE=WM_CAP_START+ 53 ;
const WM_CAP_SET_PREVIEWRATE=WM_CAP_START+ 52 ;
function FrameCallBack(hWnd: HWND; lpVHdr: PVIDEOHDR): DWORD; stdcall;
var
hd: THandle;
jpg: TJpegImage;
memStream: TMemoryStream;
Bitmap: TBitmap;
png: TPNGObject;
mystream: TMemoryStream;
i: Integer;
begin //将数据显在Image，
Bitmap := TBitmap.Create;
// New size of Bitmap
hd := DrawDibOpen;
DrawDibDraw(hd, Bitmap.Canvas.Handle, 0, 0, BMPINFO.BmiHeader.biwidth,
BMPINFO.bmiheader.biheight, @BMPINFO.bmiHeader, lpVHdr^.lpData, 0, 0,
BMPINFO.bmiHeader.biWidth, BMPINFO.bmiHeader.biheight, 0);
DrawDibClose(hd);
//发送数据
memStream := TMemoryStream.Create;
jpg := TJpegImage.Create;
jpg.Assign(Bitmap);
jpg.CompressionQuality :=15;
//jpg压缩质量
jpg.JPEGNeeded;
jpg.Compress;
jpg.SaveToStream(memStream);
jpg.Free;
//因为UDP数据包有大小限制，这里如果超出部分，就没有传输，完全可以发几次发出去
Form1.IdUDPClient1.BroadcastEnabled := true; //用广播功能
if memStream.Size > Form1.IdUDPClient1.BufferSize then
Form1.IdUDPClient1.SendBuffer('192.168.1.255', 9001, memStream.Memory^, Form1.IdUDPClient1.BufferSize) //向192.168.0.X网段广播，端口 9001
else
Form1.IdUDPClient1.SendBuffer('192.168.1.255', 9001, memStream.Memory^, memStream.Size);
memStream.Free;
Bitmap.Free;
if FileExists('abc' + '.bmp') then
begin
DeleteFile('abc' + '.bmp');
end;
end;
procedure TForm1.btn1Click(Sender: TObject);
begin
CapWnd := capCreateCaptureWindow('我的窗口', WS_VISIBLE or WS_CHILD, //窗口样式
0, //X坐标
0, //Y坐标
pnl1.Width, //窗口宽
pnl1.Height, //窗口高
pnl1.handle, //窗口句柄
0); //通常为0
if CapWnd = 0 then exit; //定义帧捕捉回调函数
CapSetCallbackOnFrame(CapWnd, FrameCallBack);
BMPINFO.bmiHeader.biWidth := 500;
BMPINFO.bmiHeader.biHeight:= 600;
CapParms.dwRequestMicroSecPerFrame := 1;
CapParms.fLimitEnabled := FALSE;
CapParms.fCaptureAudio := FALSE;
CapParms.fMCIControl := FALSE;
CapParms.fYield := TRUE;
CapParms.vKeyAbort := VK_ESCAPE;
CapParms.fAbortLeftMouse := False;
CapParms.fAbortRightMouse := FALSE; //让设置生效
CapCaptureSetSetup(capWnd, @CapParms, sizeof(TCAPTUREPARMS));
CapPreviewRate(capWnd, 33); //设置预览视频的频率
CapCaptureSequenceNoFile(capWnd); //如果要捕捉视频流，则要使用函数来指定不生成文件，不然会自动生成AVI文件
CapDriverConnect(CapWnd, 0); //连接摄像头设备，第二个参数是个序号，当系统中装有多个显示驱动程序时，其值分别依次为0到总个数如果有多个摄像头，那么就是0->1->2 capGetVideoFormat(capWnd, @BMPINFO,sizeof(TBitmapInfo)); //取得视频图像数据头
CapPreviewScale(capWnd, TRUE); //是否缩放
CapOverlay(capWnd, true); //指定是否使用叠加模式，true为使用，否则为false
CapPreview(capWnd, true);
end;
procedure TForm1.btn2Click(Sender: TObject);
begin
capCaptureAbort(CapWnd); //停止捕捉
capDriverDisconnect(CapWnd); //将捕捉窗同驱动器断开
end;
procedure TForm1.btn3Click(Sender: TObject);
begin
//mmo1.Lines.Add(vstr);
end;
end.
客户端 ：
unit Unit1;
interface
uses
Windows, Messages, SysUtils, Variants, Classes,
Graphics, Controls, Forms, Dialogs, StdCtrls,
IdBaseComponent, IdComponent, IdUDPBase, IdUDPServer, ExtCtrls, jpeg,
IdSocketHandle;
type
TForm1 = class(TForm)
img1: TImage;
idpsrvr1: TIdUDPServer;
btn1: TButton;
pnl1: TPanel;
procedure idpsrvr1UDPRead(Sender: TObject; AData: TStream;
ABinding: TIdSocketHandle);
procedure btn1Click(Sender: TObject);
procedure FormCreate(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;
var
Form1: TForm1;
implementation
{$R *.dfm}
procedure TForm1.idpsrvr1UDPRead(Sender: TObject; AData: TStream;
ABinding: TIdSocketHandle);
var jpg: TJpegImage;
j : Integer;
begin
begin
try
jpg := TJpegImage.Create;
jpg.LoadFromStream(Adata);
img1.Picture.Graphic := jpg;
jpg.Free;
except
end;
end;
end;
procedure TForm1.btn1Click(Sender: TObject);
begin
idpsrvr1.DefaultPort := 9001; //接收端口
idpsrvr1.Active := true; //启用
end;
procedure TForm1.FormCreate(Sender: TObject);
begin
img1.Parent := pnl1;
end;
end.
[解决办法]
手抖。。。。。神马情况？
