哎！散分，散分～
满足一下大家的接分心愿！
[解决办法]
[解决办法]
[解决办法]
哎，接分，接分~~
[解决办法]
接分没商量
[解决办法]
有分不接＝有钱不检！天理难容！！
[解决办法]
[解决办法]
for (i = 0; i < MAX_CCU_CHAN_NUM; i++)
{
ulRet = (UINT32)ADA_CreatMutexSem((key_t)(SEM_IPC_START_POS_SOL + i), &g_alSOLSem[ i ]);
CHECK_RET_OK_RN(ulRet, ulRet)
}
485数据发送接口INT32 RS485Transmit( UCHAR *pucData, UINT16 uwLength, UINT32 ulResourceId, UCHAR ucBit )
计算校验和UINT32 CheckSum( UCHAR *pucData, UINT16 ulLengths )
从同步结构体中获取数据UINT32 GetDataFrom485SynTab(UINT32 ulResId, UINT32* pulLen, UCHAR* pucData)
检查寻址命令返回数据是否正确UINT32 CheckAddrDataOK(UINT32 ulResourceId,UCHAR* pucData,
UINT32 ulLen, UCHAR TransOrQuery,
UINT32 *pulOutputLen, UCHAR* pucOutPutData)
寻址字节或查询命令发送UINT32 CommSendAddress( UINT32 ulResourceId,UCHAR ucTransOrQuery, UINT32 *pulLen,
UCHAR* pucData, UCHAR ucSendTimes, UINT16 uwDelayCnt)
转发命令数据发送UINT32 CommSendData( UINT32 ulResourceId, UCHAR* pucData, UINT32 ulSendLen)
根据输入的参数 组成要下发的数据UINT32 MakeSendData(UCHAR ucCmd1, UCHAR ucCmd2, UCHAR* pucSrcData,
UCHAR* pucDesData, UINT32 ulSrcLen, UINT32 *pulDesLen)
组装EMUA发送帧UINT32 MakeEMUASendData(UCHAR ucCmd1, UCHAR ucCmd2, UCHAR* pucSrcData,
UCHAR* pucDesData, UINT32 ulSrcLen, UINT32 *pulDesLen)
为上层软件提供转发命令接口UINT32 TransmitProcess( UINT32 ulResourceId,UCHAR ucCmd1,
UCHAR ucCmd2,UINT16 uwLength,UCHAR *pucData,
EMU_PROTOCOL_TYPE enType)
检查查询到的数据是否正确UINT32 CheckQueryData(UINT32 ulResourceId,UCHAR *pucCmd1,UCHAR *pucCmd2,
UINT32 ulLen, UCHAR* pucSrcData,
UINT16* puwLen, UCHAR* pucDesData,
EMU_PROTOCOL_TYPE enType)
向应用层提供的链路层查询接口UINT32 QueryProcess( UINT32 ulResourceId,UCHAR *pucCmd1,UCHAR *pucCmd2,
UINT16 uwDelayCnt, UINT16 *puwLength,UCHAR *pucData,
EMU_PROTOCOL_TYPE enType)
[解决办法]
接分有什么用
[解决办法]
[解决办法]
[解决办法]
路过，接分！
[解决办法]
[解决办法]
热烈欢迎
[解决办法]
[解决办法]
啊.....
[解决办法]
这分说真的没有用，以后发300的技术贴来散散分。
[解决办法]
